How to Attach Flowers to Wedding Sign

Are you ready to bring your big day to life with signature floral touches? Adding flowers to signs for your wedding is a great way to make sure that your ceremony and reception look beautiful. Not only are fresh blooms an eye-catching complement, but they also add natural whimsy and a sense of joy to the proceedings. Plus, attaching flowers to signs isn’t hard once you know how!

How to Attach Flowers to Wedding Sign

In this blog post on how to attach flowers to wedding sign, we’ll be taking a step-by-step approach as we walk through everything from choosing materials and picking out the right colors all the way up to finally affixing the sprays themselves. We can’t wait for you to see what stunning looks David’s Bridal has in store!

Necessary Materials

Given below are the basic materials you’ll need to create your flower-adorned wedding signs:

  • Ribbon of Your Desired Color and Width
  • Floral Wire
  • Floral Tape
  • Flower Stems With Greens Attached (We Recommend Using David’s Bridal’s Selection of Artificial Flowers!)
  • Scissors
  • Hot Glue Gun
  • Floral Foam or Styrofoam (for Greenery and Thicker Floral Pieces)
  • Poster Board or Thin Wood, Depending on Your Signage Needs

10 Step-by-step Guidelines on How to Attach Flowers to Wedding Sign

Step 1: Measure Your Sign

Measure the sign you’ll be attaching your flowers to, and then measure out the appropriate length of ribbon. Cut the ribbon at a 45-degree angle to create a nice, finished edge. This helps the ribbon to lay flat against your sign without any bumps or buckles. If you are attaching your flowers to a wooden sign, use hot glue to adhere to the ribbon.

Step 2: Attach Ribbon To Sign

Use a hot glue gun to attach the ribbon to the back of your wedding sign at 0.5-1-inch intervals, depending on its size and how you’d like it to look. This will act as an anchor for when you attach your flowers later.

Use a Hot Glue Gun

But before affixing the ribbon to the sign, be sure to position it into a desired shape or pattern. You may also find it helpful to use a ruler for this. It’s also a good idea to measure and cut your ribbon in advance so that you’re ready to go.

Step 3: Cut Floral Wire

Cut a piece of floral wire that’s about three times the length of your ribbon, and then bend it in half so that it’s easier to work with. Your pieces don’t need to be identical; just make sure that one end is either longer or shorter than the other. This will make it easier to secure your flowers when the time comes. You can also use multiple pieces of wire if you’re attaching a larger arrangement.

Step 4: Curl Floral Wire

Use your fingers to curl the ends of the wire, which will help secure your flowers in place later. This step may take some practice — but it’s an essential one! It will create a form around which you’ll wrap your flowers. Once you’re done curling the wire, use floral tape to secure it in place so that it won’t unravel. This will also add a layer of stability and protection as you go about attaching your flowers.

Step 5: Wrap Floral Tape Around the Wire

Wrap floral tape around both ends of the wire. This tape is designed to stick to itself, so don’t worry if it looks a bit messy — that’s all part of the process! You can also use a bit of hot glue to secure the tape if need be. It’s important to make sure that the floral tape is tight on the wire — this will prevent your flowers from slipping out.

Use Floral Tape to Secure It in Place

Step 6: Place Flowers On Ribbon

Lay your flowers on top of the ribbon, and then use the floral wire you’ve already prepared to secure them in place. Again, this may take some trial and error — but that’s okay! But be sure to keep the wire tight around your flowers so that they don’t move. You can also use a bit of hot glue on the back of some of the larger, heavier flowers to make sure they stay in place.

Step 7: Wrap Floral Tape Around the Flowers

Wrap floral tape around the stems of your flowers, starting at the base and working up to cover them completely. This will help keep all of your pieces securely in place on the ribbon.

This is also a great way to add a bit of texture and visual interest. You can use the tape to create patterns, such as circles or stripes — it’s totally up to you! It’s all about creating a unique look that reflects your personal style.

Step 8: Place Greenery On Sign

Place greenery at the base of your ribbon and flowers. This will create visual interest and an organic look, as well as provide additional security for the blooms themselves. But if your greenery is too thick or heavy, you may want to use floral foam or styrofoam as an anchor. This will help keep everything in place and look perfect for your big day! If you’re using foam, be sure to secure it with hot glue.

Step 9: Secure Greenery With Floral Wire

Use Floral Foam or Styrofoam

Use floral wire to secure the greenery in place on the sign. Start by wrapping the wire around one end of the greenery, and then work your way up as you continue to wrap. Although this step may take some time, it’s totally worth it — the end result will be beautiful! It will also make sure that your greenery stays in place for the entire wedding.

Step 10: Secure Greenery With Floral Tape

Wrap the floral tape over the wire pieces you’ve already placed and secured. This will further secure your greenery in place on the sign — and you’re done! Always be sure to use plenty of tape so that the greenery is extra secure. And there you have it: a finished flower-adorned wedding sign!

Following these 10 simple steps on how to attach flowers to wedding sign, you’ll be able to attach flowers to wedding signs with ease. Not only will your decorations look perfect and professional, but they’ll also have that special homemade touch that everyone is sure to love. So go ahead and get crafting — happy creating!

Tips for Choosing the Right Materials

Given the wide range of materials available for flower arranging, it’s important to know which ones are best suited for wedding signage. Here are a few tips to keep in mind when selecting your supplies:

  • Choose Artificial Flowers That Have Greens Attached — This Will Add Texture and Dimension to Your Bouquet Without Having to Spend Extra Money on Fresh Greenery.
  • Opt for a Waterproof Adhesive if You’ll Be Attaching Your Flowers to Metal or Plastic Signs. This Will Help Keep Them in Place and Look Great for Years to Come.
  • Use a Strong Wire That Won’t Easily Bend When Wrapping Around the Stems of Your Flowers. Floral Wire is Usually the Best Choice as It’s Made Specifically With Flower Arranging in Mind.
  • When Buying Ribbons, Make Sure to Choose One That is Thick Enough to Hold the Weight of Your Arrangement. A Thicker Ribbon Will Help Keep Everything in Place and Look Great for Photos!

Frequently Asked Questions

Q1: What Type of Ribbon Should I Use?

A1: Satin and grosgrain ribbons are lightweight and easy to work with. It’s also a good idea to use a ribbon that complements the colors of your flowers.

Q2: Which Flowers Should I Use?

A2: If you want your decorations to last, consider using David’s Bridal’s selection of faux greenery and artificial blooms. They’ll not only look great but they will also help create a cohesive aesthetic that will set the tone for your event.

Q3: Can I Use Real Flowers?

A3: While real flowers can be used, they won’t last as long as artificial ones. Plus, it’s often difficult to find blooms with the same colors and shapes that will create a cohesive look. However, if you decide to go with fresh flowers, make sure to use floral foam or styrofoam to anchor them in place.

Real Flowers Can Be Used

Q4: Are There Any Other Materials I Should Consider?

A4: Hot glue is an essential tool for this project, as it will help secure your ribbon and flowers in place. Floral wire and tape are also recommended, as they will provide additional security for the blooms themselves. Finally, a thin piece of wood or poster board can be used for your base, depending on your signage needs.


Now that you know the basics of attaching flowers to a wedding sign, you can feel more confident taking on this task with ease. Have fun and be creative by experimenting with different colors, textures, and types of flowers. Additionally, consider reaching out to a professional florist or craft store for tips or advice if you’re feeling unsure about your abilities.

Whatever direction you choose to go, rest assured knowing that guests will appreciate the extra effort in making sure your wedding decorations look top-notch! Try out these steps on how to attach flowers to wedding sign now so you can make an unforgettable statement at your wedding. Good luck!

Photo of author

Jennifer Branett

Leave a Comment